Yamaha XT250X - Installing the Rear Shock Absorber Assembly

REAR SHOCK ABSORBER ASSEMBLY
4-53
EAS23310
INSTALLING THE REAR SHOCK
ABSORBER ASSEMBLY
1. Install:
● Rear shock absorber assembly
NOTE:
Install the rear shock absorber by facing its valve
backward.
2. Tighten:
● Rear shock absorber assembly upper nut
●
Relay arm nut (frame side)
● Rear shock absorber assembly lower nut
● Connecting arm nut (relay-arm side)
●
Connecting arm nut (swingarm side)
Installed depth “a”
4.5 mm
Installed depth “b”
3 mm
Installed depth “c”
4 mm
Rear shock absorber assembly
upper nut
50 Nm (5.0 m•kg, 36 ft•lb)
Relay-arm nut (frame side)
50 Nm (5.0 m•kg, 36 ft•lb)
Rear shock absorber assembly
lower nut
40 Nm (4.0 m•kg, 29 ft•lb)
Connecting arm nut (relay-arm
side)
59 Nm (5.9 m•kg, 43 ft•lb)
Connecting arm nut (swingarm
side)
59 Nm (5.9 m•kg, 43 ft•lb)
a
b
b
c
1
2
3
3
3
T
R
.
.
T
R
.
.
T
R
.
.
T
R
.
.
T
R
.
.