Yamaha XT250X - STEERING HEAD

STEERING HEAD
4-47
EAS23090
STEERING HEAD
Removing the head light unit, meter assembly and front fender
Order Job/Parts to remove Q’ty Remarks
Tool box
Refer to “GENERAL CHASSIS” on page
4-1.
Fuel tank Refer to “FUEL TANK” on page 6-1.
Handlebar Refer to “HANDLEBAR” on page 4-35.
Fork leg Refer to “FRONT FORK” on page 4-39.
1 Head light cowling 1
2 Headlight unit 1
3 Headlight coupler 1 Disconnect.
4 Turn signal light connector 2 Disconnect.
5 Front turn signal light/rear turn signal light 1/1
6 Meter assembly coupler 3 Disconnect.
7 Meter assembly 1
8 Brake hose holder 1
9 Head light unit stay 1
10 Front fender 1
11 Brake hose holder bracket 1
For installation, reverse the removal proce-
dure.
1
4
7
4
5
6
(4)
(4)
2
8
11
10
T
R
.
.
7 Nm (0.7 m • kg, 5.1 ft • Ib)
T
R
.
.
7 Nm (0.7 m • kg, 5.1 ft • Ib)
T
R
.
.
7 Nm (0.7 m • kg, 5.1 ft • Ib)
T
R
.
.
10 Nm (1.0 m • kg, 7.2 ft • Ib)
T
R
.
.
7 Nm (0.7 m • kg, 5.1 ft • Ib)
T
R
.
.
7 Nm (0.7 m • kg, 5.1 ft • Ib)
T
R
.
.
2 Nm (0.2 m • kg, 1.4 ft • Ib)
3
5
T
R
.
.
3 Nm (0.3 m • kg, 2.2 ft • Ib)
9