Need help?Do you have a question about the Yamaha Y16ZR 2021 and is the answer not in the manual?
General| Engine Type | Liquid-cooled, 4-stroke, SOHC, 4-valve |
|---|---|
| Displacement | 155 cc |
| Bore x Stroke | 58.0 mm x 58.7 mm |
| Compression Ratio | 11.6:1 |
| Fuel System | Fuel Injection |
| Ignition System | TCI |
| Starter System | Electric |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic Fork |
| Overall Length | 1, 975 mm |
| Seat Height | 795 mm |
| Wheelbase | 1, 290 mm |
| Wet Weight | 119 kg |
| Maximum Torque | 14.4 Nm @ 8, 000 rpm |
| Front Brake | Hydraulic Single Disc |
| Rear Brake | Hydraulic Single Disc |
| Fuel Tank Capacity | 5.4 L |
| Maximum Power | 17.7 hp @ 9, 500 rpm |
Owner's responsibilities for safe motorcycle operation.
Importance and types of protective gear for motorcycle riders.
Hazards of engine exhaust and precautions.
Guidance on selecting and wearing motorcycle helmets correctly.
Pre-operation checks and riding practices for safety.
Introduction to the smart key system features and operation.
Instructions for turning the smart key on/off and checking status.
Steps for replacing the smart key's battery.
Explanation of the main switch's functions and positions.
Detailed steps for turning vehicle power on/off using the main switch.
Explanation of various indicator and warning lights on the instrument panel.
Meaning and action for the engine trouble warning light.
Location and function of left and right handlebar controls.
Verifying fuel level, fuel line, and engine oil.
Checking coolant level and inspecting front/rear brakes.
Guidelines for the engine break-in period (0-1600 km).
Step-by-step procedure for starting the motorcycle's engine.
How to control engine power by shifting gears using the clutch.
Schedule for emission system maintenance tasks.
Schedule for general maintenance and lubrication tasks.
How to inspect, check gap, and replace the spark plug.
Checking engine oil level and replacing the oil filter.
Importance and procedure for checking/adjusting valve clearance.
Inspecting brake pads for wear using indicator grooves.
Verifying brake fluid level and replenishing if necessary.
Checking and maintaining the coolant level and system.
Tire inspection, air pressure, and replacement advice.
A guide to diagnosing and resolving common engine starting issues.
Causes, warnings, and checks for engine overheating.
How to operate the vehicle using emergency mode with identification number.
To Next Page