Yamaha YDRA Owner's And Operator's Manual

1
2
3
4
5
6
7
8
9
10
11
8-11
JC0
MAINTENANCE
Y-57
9. Install the bag holder insert 3
and secure with two bolts 2
and seven plastic rivets 1.
TIP
For transaxle oil replacement, con-
sult a Yamaha dealer or other
qualified mechanic.
Before performing wheel or brake
maintenance, verify that the main
switch is in the “OFF” position.
Serious transaxle damage can
result.
Wheel Replacement
To remove and install a wheel on
your PTV:
1. With the wheels blocked to
prevent the PTV from moving,
loosen the wheel nuts.
2. Elevate the PTV with a jack and
remove the wheel nuts and the
wheel.
3. Reverse the removal steps when
installing the wheel.
Wheel nut tightening torque:
88 Nm, 8.8 m
.
kg (65 ft
.
lb)
Brake Adjustment
The internal wet brake on your PTV
requires no adjustment.
Before you operate the PTV, press
down on the brake pedal several
times to make sure the brakes are
functioning properly.
NOTICE
1
2
3
Y-1994
JC0-F8199-22_2014_LIT_19626_00_81.qxd 3/22/13 9:01 AM Page 39

Yamaha YDRA Specifications

General

Brand	Yamaha
Model	YDRA
Category	Offroad Vehicle
Language	English