Yamaha YP250 5GM2-AE1 2000 User Manual

15
LUBRICATION POINTS AND GRADE OF LUBRICANT
SPEC
LUBRICATION POINTS AND GRADE OF LUBRICANT
ENGINE
Lubrication Point
Symbol
Oil seal lips
O-ring (Except V-belt drive unit)
Cylinder head tightening nut mounting surface
Crankshaft pin outside
Connecting rod big end thrust surface
Rotary filter inner surface
Drive gear inner surface
Cam chain outside sprocket inner surface
Piston pin
Piston outside and ring groove
Camshaft cam profile
Valve stem (IN, EX)
Valve stem end (lN, EX)
Rocker shaft
Valve rocker arm inner surface
Shaft
Shaft (Oil pump assembly)
Gasket (Oil pump assembly)
Holder
Idle gear 1 thrust surfaces
Shaft 1
Idle gear 2 thrust surfaces
Idle gear 2 inner surface
Main axle thrust surfaces
Crankcase mating surfaces Yamaha bond No. 1215
Crankcase breather plug
Stator grommet Yamaha bond No. 1215
Suction pipe

Yamaha YP250 5GM2-AE1 2000 Specifications

General

Displacement	249cc
Starter System	Electric
Front Suspension	Telescopic fork
Rear Suspension	Unit Swing
Front Brake	Single disc
Max Power	15.8 kW @ 7500 rpm
Transmission	V-belt automatic
Fuel Capacity	12 L