What to do if my Yamaha YST-FSW100 Subwoofer has no sound?
If your Yamaha Subwoofer isn't producing any sound, first, ensure that the VOLUME control isn't set to 0; if it is, turn the VOLUME control to the right (clockwise). Also, check that the subwoofer cable is securely connected.
Why is the sound level too low on my Yamaha YST-FSW100 Subwoofer?
If the sound level on your Yamaha Subwoofer is too low, there might be a few reasons. You may be playing a sound source without enough bass frequencies, so try a different source. Standing waves could also be diminishing the sound level; try repositioning the subwoofer or placing bookshelves or other large objects along the wall to break up parallel surfaces. The input signal might be too small, so turn up the volume. Finally, ensure that there is a signal from the subwoofer output terminal of the component by checking the speaker mode setting on the component.
What to do if my Yamaha Subwoofer is not turning on?
If your Yamaha Subwoofer isn't powering on even when the POWER switch is ON, turn the power switch OFF, then ensure the power plug is securely connected.
General| Type | Home theatre speakers |
|---|---|
| Bass optimization | Yes |
| Dimensions (WxDxH) | 400 x 157 x 375 mm |
| Audio output channels | 1.0 channels |
| Frequency range | 30 - 200 Hz |
| RMS rated power | 130 W |
| Product color | Black |
Weight and Dimensions| Weight | 9000 g |
|---|
Explanation of safety symbols like lightning flash and exclamation point.
Essential safety rules for operating the subwoofer and preventing hazards.
Guidelines on unit modifications, cable usage, and FCC Part 15 regulations.
Guidelines for wiring the mains lead according to UK standards.
Instructions on where to install the unit to prevent damage and ensure performance.
Guidance on setting the voltage selector and critical warnings for safe operation.
List of items included in the subwoofer package.
Recommendations for placing the subwoofer for best bass effect.
Step-by-step guide for connecting the subwoofer to audio sources.
Using system connector cables to link Yamaha components for power control.
Setting the voltage selector for local main voltage before plugging in.
Explanation of power controls, volume adjustment, and input terminal.
Procedure for setting the initial volume balance with other speakers.
Details on Yamaha's YST II technology for high-quality bass reproduction.
A chart listing common issues and their remedies.
Detailed technical specifications and frequency response graph.
To Next Page
