Need help?Do you have a question about the Yamaha YZ125 2019 and is the answer not in the manual?
General| Bore x Stroke | 54.0mm x 54.5mm |
|---|---|
| Compression Ratio | 8.6~10.7:1 |
| Fuel Delivery | Mikuni® TMX 38 |
| Ignition | CDI |
| Final Drive | Chain |
| Front Tire | 80/100-21 |
| Rear Tire | 100/90-19 |
| Width | 32.5 in |
| Seat Height | 38.6 in |
| Fuel Capacity | 2.1 gal |
| Engine Type | 2-stroke, liquid-cooled, reed-valve inducted |
| Transmission | 6-speed |
| Front Suspension | KYB® spring-type fork with speed-sensitive damping; 11.8-in travel |
| Rear Suspension | KYB® single shock; 12.4-in travel |
| Front Brake | Hydraulic single disc brake |
| Rear Brake | Hydraulic single disc brake |
Details critical measurement standards and limits for engine and chassis components.
Specifies the correct torque values for various fasteners throughout the vehicle for proper assembly.
Covers the procedures for removing, inspecting, and assembling the cylinder head, cylinder, and piston.
Covers the removal and inspection procedures for the crankcase and crankshaft components.
Details the disassembly, inspection, and assembly of the front and rear brake systems.
Covers the removal, disassembly, inspection, and assembly of the front fork suspension system.
Details the removal, inspection, and installation of the rear shock absorber assembly.
Provides guidance on carburetor settings and tuning for optimal engine performance under various conditions.
To Next Page