To Next PageTo Next Page
Need help?Do you have a question about the Yamaha YZ125 2016 and is the answer not in the manual?
General| Displacement | 124cc |
|---|---|
| Bore x Stroke | 54.0mm x 54.5mm |
| Compression Ratio | 8.6~10.7:1 |
| Ignition | CDI |
| Final Drive | Chain |
| Front Suspension | KYB® Speed-Sensitive System inverted fork; fully adjustable, 11.8-in travel |
| Rear Suspension | KYB® single shock; fully adjustable, 12.4-in travel |
| Front Brake | Hydraulic single disc brake, 250mm |
| Rear Brake | Hydraulic single disc brake, 245mm |
| Front Tire | 80/100-21 |
| Rear Tire | 100/90-19 |
| Width | 32.5 in |
| Height | 51.4 in |
| Rake (Caster Angle) | 27.5° |
| Fuel Capacity | 2.1 gal |
| Engine Type | 2-stroke, liquid-cooled |
| Fuel Delivery | Keihin PWK38S carburetor |
| Transmission | 6-speed |
Crucial warnings and guidelines for safe operation of the vehicle.
Step-by-step instructions for the engine break-in period.
Torque values for engine components.
Torque values for chassis components.
Specific measurements and limits for engine components.
Maintenance specifications for chassis components.
Recommended intervals for inspecting and servicing parts.
Essential checks to perform before operating the vehicle.
Adjusting carburetor settings for optimal engine performance based on conditions.
Adjusting front fork damping and spring preload.
Adjusting rear shock absorber spring preload and damping.
Guide to lubricating critical components for smooth operation and longevity.
Guide to adjusting carburetor settings for various conditions.
Steps for removing, inspecting, and installing clutch components.
Procedures for safely removing and reinstalling the engine.
Steps for removing the crankshaft and disassembling the crankcase.
Procedures for installing the crankshaft and assembling the crankcase.
Procedures for removing, disassembling, and installing brake components.
Procedures for removing, inspecting, adjusting, and installing the rear shock absorber.
