Yamaha yz250f 2005 Service Manual

3 - 36
INSP
ADJ
REAR SHOCK ABSORBER INSPECTION
Extent of adjustment
Maximum Minimum
Fully turned in
position
20 clicks out
(from maximum
position)
• STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
WARNING
Always adjust each front fork to the same
setting. Uneven adjustment can cause poor
handling and loss of stability.
Standard position:
11 clicks out
EC36K000
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
• Swingarm smooth action
Abnormal noise/unsmooth action →
Grease the pivoting points or repair the
pivoting points.
Damage/oil leakage → Replace.

Yamaha yz250f 2005 Specifications

General

Engine Type	4-stroke, liquid-cooled, DOHC, 5-valve
Displacement	249 cc
Bore x Stroke	77.0 x 53.6mm
Compression Ratio	12.5:1
Ignition	CDI
Transmission	5-speed
Final Drive	Chain
Front Tire	80/100-21
Rear Tire	100/90-19
Front Suspension	Telescopic fork
Front Brake	Single disc
Rear Brake	Single disc
Wheelbase	1, 475 mm
Width	32.5 in