EasyManuals Logo

Yamaha YZFR6V User Manual

Yamaha YZFR6V
419 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
FEATURES
1-8
To set the clock:
1. Push the SELECT button and RESET but-
ton together for at least two seconds.
2. When the hour digits start flashing, push the
RESET button to set the hours.
3. Push the SELECT button, and the minute
digits will start flashing.
4. Push the RESET button to set the minutes.
5. Push the SELECT button and then release
it to start the clock.
Odometer, tripmeter, and stopwatch modes
Push the SELECT button to switch the display
between the odometer mode ODO, the tripme-
ter modes TRIP A and TRIP B and the stop-
watch mode in the following order:
TRIP A TRIP B ODO Stopwatch
TRIP A
If the fuel level warning light comes on, the
odometer display will automatically change to
the fuel reserve tripmeter mode F-TRIP and
start counting the distance traveled from that
point. In that case, push the SELECT button to
switch the display between the various tripme-
ter, odometer, and stopwatch modes in the fol-
lowing order:
F-TRIP Stopwatch TRIP A TRIP B
ODO F-TRIP
To reset a tripmeter, select it by pushing the SE-
LECT button, and then push the RESET but-
ton for at least one second. If you do not reset
the fuel reserve tripmeter manually, it will reset
itself automatically and the display will return to
the prior mode after refueling and traveling 5 km
(3 mi).
Stopwatch mode
To change the display to the stopwatch mode,
select it by pushing the SELECT button. (The
stopwatch digits will start flashing.) Release the
SELECT button, and then push it again for a
few seconds until the stopwatch digits stop
flashing.
Standard measurement:
1. Push the RESET button to start the stop-
watch.
2. Push the SELECT button to stop the stop-
watch.
3. Push the SELECT button again to reset the
stopwatch.
Split-time measurement:
1. Push the RESET button to start the stop-
watch.
2. Push the RESET button or start switch “”
to measure split-times. (The colon : will start
flashing.)
3. Push the RESET button or start switch “”
to display the final split-time or push the SE-
LECT button to stop the stopwatch and dis-
play total elapsed time.
4. Push the SELECT button to reset the stop-
watch.
NOTE:
To change the display back to the prior mode,
push the SELECT button for a few seconds.
Coolant temperature display
The coolant temperature display indicates the
temperature of the coolant. Push the RESET
button to switch the coolant temperature display
to the air intake temperature display.
NOTE:
When the coolant temperature display is select-
ed, C is displayed for one second, and then the
coolant temperature is displayed.
1. Odometer/tripmeters/fuel reserve
tripmeter/stopwatch
1. Coolant temperature display

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha YZFR6V and is the answer not in the manual?

Yamaha YZFR6V Specifications

General IconGeneral
BrandYamaha
ModelYZFR6V
CategoryMotorcycle
LanguageEnglish

Related product manuals