Operation
64
4. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch “” (down) to retract the
trim rods.
NOTICE:
Be sure to retract
the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.
[ECM00251]
EMU33121
Procedure for tilting down (power
trim and tilt models)
1. Push the power trim and tilt switch “”
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
3. Push the power trim and tilt switch “”
(down) to lower the outboard motor to
the desired position.
ZMU03996
ZMU03997
ZMU03998
DN
ZMU01936
UP
DN
ZMU04603
DN
✩✫✳✬✤✲ ✩✧
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
Need help?
General
