Hull identification number – CIN (2.1) ISO 100087:1996 / A1:2000
Builder's plate (2.2) RCD annex I, 2.2 RSG Guidelines
Protection from falling overboard... (2.3) EN ISO 15085:2003
Visibility from the main steering position (2.4) RSG Guidelines NBS F10
User manual (2.5) ISO 10240:2004
Structure (3.1) ISO 12215-5:2008, ISO 12215-6:2008 RSG Guidelines, NBS-VTT Extended rule
Stability and freeboard (3.2) EN ISO 12217-3:2002 + A1:2009 RSG Guidelines NBS F3
Buoyancy and flotation (3.3) EN ISO 12217-3:2002 RSG Guidelines NBS F12
Openings in hull, deck and superstructure (3.4) EN ISO 9093-1:1997
Water incursion (3.5) EN ISO 15083:2003 RSG Guidelines
Maximum recommended load (3.6) EN ISO 14946:2001 / AC 2005 RSG Guidelines NBS F3
Life raft stowage (3.7) RSG Guidelines
Evacuation (3.8) ISO 9094 RSG Guidelines
Anchoring, mooring and towing (3.9) EN ISO 15084:2003 RSG Guidelines
Handling characteristics (4) EN ISO 11592:2001, EN ISO 8665:2006 RSG Guidelines NBS F10
Installation requirements (5)
Engines and engine spaces (5.1) ISO 11105, ISO 9094 RSG Guidelines
Inboard engine (5.1.1)
Ventilation (5.1.2)
Exposed parts (5.1.3)
Starting the outboard engine (5.1.4)
Fuel system (5.2) EN ISO 11105:1997 RSG Guidelines
General – fuel system (5.2.1)
Fuel tanks (5.2.2)
Electrical systems (5.3) EN ISO 10133:2000, ISO 8846:1990 RSG Guidelines
Steering system (5.4) EN ISO 28848 + A1:2000
General – steering system (5.4.1)
Emergency arrangements (5.4.2)
Gas system (5.5) ISO 10239
Fire protection (5.6) ISO 9094
General – fire protection (5.6.1)
Fire-fighting equipment (5.6.2)
Navigation lights (5.7) 1972 COLREG
Discharge prevention (5.8) RSG Guidelines
To Next Page
Loading...
