Need help?Do you have a question about the Yanmar 4CHL-N and is the answer not in the manual?
Procedure for filling the fuel tank and ensuring system cleanliness before refueling.
Steps for adding lubricating oil and checking the oil level using the dipstick.
Instructions for filling the cooling system with clean water and tightening drain plugs.
Procedure to remove air from the fuel system, critical for starting after filter changes.
Pre-start checklist covering essential checks like fluid levels and switch positions.
Steps for safely starting the engine, including switch operation and initial speed setting.
Procedure for filling the fuel tank and ensuring system cleanliness before refueling.
Steps for adding lubricating oil and checking the oil level using the dipstick.
Instructions for filling the cooling system with clean water and tightening drain plugs.
Procedure to remove air from the fuel system, critical for starting after filter changes.
Pre-start checklist covering essential checks like fluid levels and switch positions.
Steps for safely starting the engine, including switch operation and initial speed setting.
General| Engine Model | 4CHL-N |
|---|---|
| Number of Cylinders | 4 |
| Combustion System | Direct injection |
| Starting System | Electric starting |
| Cooling System | Water-cooled |
| Lubrication System | Forced lubrication by trochoid pump |
To Next Page
