25 OPE_EF312T&352T_en.doc
HYDRAULIC SYSTEM
Position control lever
Position control lever controls height of rear hitched an
implement in a desired position.
Lever stopper (B) limits lowering an implement to limit
the working range of the lever, or when traveling on
road.
(A) Position control lever
(B) Lever stopper
(UP) Raise
(DW) Lower
Hydraulic stop and slow return valve
Used to control the lowering speed of implement.
(A) Hydraulic stop and slow return valve
(OP) Open the valve and fast lowering of
implement
(CL) Slow lowering of implement and it stops
hydraulic flow when turned fully.
IMPORTANT
When driving on a road with rear hitched implement, open
the hydraulic stop and slow return valve and fix the hydraulic
control lever in raise position with stopper.
Do not operate the hydraulic control lever when the valve is
fully closed.
Otherwise, it may damage hydraulic parts.
To Next Page
Loading...
