35 OPE_EF312T&352T_en.doc
Stop engine
(1) Push accelerator lever (A) toward (a) to decrease
engine speeds.
(2) Turn key switch to “OFF” position.
(3) See main shift lever, range shift lever, reverser
lever and PTO shift lever are in neutral positions.
IMPORTANT
Sudden stop of hot engine may cause engine
overheating. Prior to stop engine, keep engine
running at 1200 - 1500 rpm for about 2 minutes to cool
down.
(A) Accelerator lever (SL) Slow speed
4-2. Start, gear shifting and stop tractor
Start tractor
(1) Be sure right and left brake pedals are connected
by connector.
(2) Set engine speed about 1500 rpm.
(A) Brake pedals (B) Connector
(3) Move position control lever backward and raise rear
hitched implement.
(A) Position control lever
(UP) Raise rear hitch implement
(4) Depress clutch pedal fully and shift main shift lever
and range shift lever to desired speed.
(A) Main shift lever
(B) Range shift lever
(5) Shift reverser lever to forward or reverse.
(6) Release clutch pedal gradually and tractor starts.
IMPORTANT
1) Never rest your foot on clutch pedal while operating.
It will cause pre-mature wearing of clutch disc.
2) Never fail to lock the parking brake when you leave
the tractor.
3) Look around the tractor to start.
(C) Reverser lever (N) Neutral
(F) Forward (R) Reverse
To Next Page
Loading...
