WARNING
Electrical Shock Hazard
ALWAYS turn off the battery
switch (if equipped) or
disconnect the negative
battery cable before servicing
the Sail-Drive.
ALWAYS keep the electrical connectors
and terminals clean. Check the electrical
harnesses for cracks, abrasions, and
damaged or corroded connectors.
CAUTION
The safety messages that follow have
CAUTION level hazards.
These safety messages describe a
hazardous situation which, if not
avoided, could result in minor or
moderate injury.
Slipping and Tripping Hazard
Ensure that adequate floor
space is set aside for
servicing Sail-Drive. The floor
space must be clean, flat and
free of spilled liquids and
debris to prevent slipping or tripping.
PERIODIC MAINTENANCE
32 SD Operation Manual
© 2009 Yanmar Marine International
To Next Page
Loading...
