Draining and Replacing Lubricating
Oil - SD50 / SD50-4T
Lubricating oil should be changed while the
engine is still warm. CAUTION! Let the
drive unit cool at least 5 minutes after
operation before removing the oil drain
plug. Hot oil could spurt out forcefully if
the drain plug is removed from the drive
unit immediately after operation.
SD50 / SD50–4T
0005451
(1)
(2)
(3)
Figure 3
1 – Dipstick
2 – Plug
3 – Drain Plug
PERIODIC MAINTENANCE
40 SD Operation Manual
© 2009 Yanmar Marine International
To Next Page
Loading...
