Yard force AQUAJET 2 - Product Safety Warnings; Battery Pack Handling and Storage; Battery Charging Procedures; Charger Safety

14 15
9. Do not attempt to open the battery yourself.
10. When battery pack is not in use, keep it away from
other metal objects such as paperclips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Charging
1. Recharge only with the charger specied by the
manufacturer. Do not use the original charger on
other Li-Ion batteries or on any other type of battery
as this can increase the risk of re or explosion.
2. Check the battery charger, cable and plug before
each use. Do not use the battery charger if damaged.
Do not open the battery charger yourself; charger
must be repaired by qualied personnel using original
spare parts.
3. The charger is designed to use a standard household
230-240 V~ 50/60Hz power source, ensure that the
plug matches the outlet.
4. Never modify the plug in any way, this will reduce the
risk of electric shock.
5. Do not abuse the cord of charger. Never use the cord
for carrying, pulling or unplugging the charger. Keep
the cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
6. Make sure the charger cord is situated so that it will
not be stepped on, tripped over or get damaged.
7. Keep the battery charger clean. Contamination can
increase the risk of electric shock.
8. Protect the battery charger from rain and moisture.
If water accesses the battery charger there is an
increased risk of electric shock.
9. Battery will heat up whilst charging. To reduce the risk
of re, do not operate battery charger on ammable
surfaces such as paper or textiles.
10. Only use the authorised charger by manufacturer
model AL C24C.
Maintenance and storage
1. Disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery
pack) and check for damage after use.
2. Disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery
pack) before carrying out maintenance or cleaning
work.
3. Leave the hose connected to the appliance and spray
gun while the unit is pressurised. It is dangerous to
detach the hose while the unit is pressurised.
4. Use only the manufacturer’s recommended
replacement parts and accessories.
5. Inspect and maintain the product regularly. Have the
product repaired only by an authorised service centre
or similar qualied specialist.
6. When not in use, store the product out of the reach of
children.
PRODUCT SAFETY WARNINGS PRODUCT SAFETY WARNINGS