Yard force Classic 500B - System and Boundary Settings; System Time Configuration; Boundary Trimming and Signal Settings; Ultrasonic Sensor Settings

15
CLOUDHAWK
GB
System Time Setting
Set the mower system time automatically (based on your mobilephone
time) and also set it manually
Boundary Settings
- Trimming: edge cutting function on/off
- Width: Set how far the mower is allowed to go beyond the perimeter
wire. (Function only for SA series, NX series, Revola series)
- Signal: Change from S1 to S2
Ultrasonic Settings
The user can active/disable the ultrasonic sensor and also c a n set the
distance the robotic mower should stop and turn in another direction.