Yard force CLOUDHAWK - Enter Configuration Mode; Bluetooth Device Configuration; WiFi Device Configuration

8
CLOUDHAWK
Enter Configuration Mode
Each model has different connection pathways,
see which one you should use below:
Bluetooth device
After you grant the Bluetooth and location access
number
A
will show up. please press the Bluetooth
symbol button, make sure that the below BLUE
LED is lighting on.
NOTE
：
Bluetooth is enabled by default for
following models: SA650B, SA900B, Classic
500B, Classic 600B.
WiFi device
After you grant the WiFi and location access,
then follow number
B
will show up. before your enter configuration
process, normally the WiFi LED should flash
slowly (one ash per second).
To configure the WiFi, the user need press the
WiFi button and hold
for 5 seconds, until the LED islit continuously, this
means the device has congured.
LED ashing quickly(4 times per second): Internet
connected
LED ashing slowing (one time per second): No
Internet connection
LED is lit continusouly: Device is conguring
A
B