Yard force CLOUDHAWK - NX Series WiFi Configuration; WiFi Configuration Steps

9
CLOUDHAWK
GB
NX series model
After you grant the WiFi and location access
number
C
will show up. before your enter configuration
process, normally the WiFi LED should flash
slowly (one time per second).
To congure the WiFi, follow the below process:
1. Power on the device and enter device control
interface with PIN code.
2. Press the WiFi button
3. Use the numeral key “1” to select the “WiFi
congure”
4. Then the device is under WiFi conguration
process, follow the rest on app
LED ashing quickly(4 times per second): Internet
connected
LED ashing slowing (one time per second): No
Internet connection
LED is lit continuously: Device is conguring
C