EasyManua.ls Logo

Yard force GT A42 - Attaching the Shoulder Belt; FUEL; Fuel Mixture and Type

Yard force GT A42
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
ATTACH THE SHOULDER BELT
The brush cutter must always be used with the shoulder
belt.
Clip the hook on shoulder strap to the strap
attachment point (5)
WARNING! Always us the brush cutter with the shoulder belt.
FUEL
USE FRESH UNLEADED FUEL (PETROL), 90 OCTANE OR BETTER – Do
NOT use E10 or Ethanol blends. Mix with a premium grade air cooled 2 stroke
oil at a ratio of 40:1
Mix fuel with 2 stroke oil in an approved container. Shake gently and ensure a
thorough mix.
CAUTION! Never use raw fuel without oil in your unit. This will cause
permanent engine damage and void the warranty for that product.
Never use a fuel mixture that has been stored for over 90 days.
CAUTION! The 2 stroke oil must be a premium grade oil for 2-cycle
air cooled engines and must be mixed at a 40:1 ratio with the fuel.
Mixing the fuel at a greater ratio than 40:1 provides insu󰀩cient
lubrication and will cause engine damage and voids your warranty.
Unleaded Plus 2 stroke oil.
Mixed 40:1
40:1
WARNING! Fuel is very ammable. Use extreme care when mixing,
storing or handling fuel or serious personal injury may result.