7
Australian regulatory compliance mark.
SAFETY INSTRUCTIONS
TRAINING
A. Read the instructions carefully. Get familiar with the controls and
proper use of the tool.
B. Only use the tool for the purpose for which it was designed. Any
other use can be hazardous and may also cause damage to the tool.
C. Never allow children or people unfamiliar with these instructions to
use the tool. Local regulations may restrict the age of the operator.
D. Never use the tool:
• When people, especially children, or pets are nearby.
• If the operator has taken medicine or substances that can
aect his ability to react and concentrate.
E. Remember that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
WARNING! Proper safety precautions must be observed. Like
all power equipment this tool must be handled carefully. DO NOT
EXPOSE YOURSELF OR OTHERS TO DANGER. Follow these
general rules. Do not permit others to use this tool unless they are
trained in its operation.
WARNING! THIS TOOL CAN CAUSE SERIOUS INJURIES. Read
the instructions carefully for the correct handling, preparation,
maintenance, starting and stopping of the tool. Be familiar with all
controls and the proper use of the tool.
GENERAL SAFETY INSTRUCTIONS
A. Never allow children to use the tool.
B. Beware of overhead power lines.
C. Do not use the tool while people or children are nearby. Keep at
least 15 metres away.
D. Dress properly! Do not wear loose clothing or jewellery, which can be
caught in moving parts.
E. Use of sturdy gloves, nonskid footwear hearing protection and safety
glasses.
F. Use extra care when handling fuels. They are ammable and the
vapours are explosive.
To Next Page
Loading...
Need help?
General