To Next PageTo Next PageHow to fix Yard force MB 400 Lawn Mower not docking?
To resolve docking issues with your Yard force Lawn Mower, verify that the boundary wire in front of and underneath the charger is straight. Also, ensure the docking station is positioned correctly as described in the manual.
What to do if my Yard force Lawn Mower is not charging?
If your Yard force Lawn Mower doesn't charge, ensure it's correctly docked in the charge base and that the base is on a flat surface. Also, inspect the charger pins for corrosion and clean them if necessary.
Why is my Yard force Lawn Mower so noisy?
If the Yard force Lawn Mower is noisy, check the following: * Inspect the blade fixing screws and tighten them if they are loose. * Inspect the blades for any damage and replace them if needed. * If the grass is too high, increase the cutting height or mow the lawn with an ordinary lawnmower first.
Why does my Yard force MB 400 run in circles?
If your Yard force Lawn Mower is running in circles, it could be due to several reasons: * A power cable running parallel and close to the boundary wire. Ensure no power cables are near the boundary wire, and reposition the wire if needed. * The front wheel may be stuck. Check the front wheel. * If a neighbor uses a similar robotic mower, their signals might interfere. Try setting your docking station and mower to an alternative boundary signal. * The driving motor may be damaged, in this case please contact customer support.
What to do if Yard force MB 400 returns to docking station after pressing START?
If your Yard force Lawn Mower remains at or returns to the docking station when you press the START button, it might be because the mower has already completed its programmed working time for the day. Another possible reason is that the battery is low; allow the mower time to charge and then try again.
What does it mean when S1/S2 indicator flashes on Yard force MB 400 Lawn Mower?
If the S1/S2 indicator on your Yard force Lawn Mower is flashing, it indicates that the boundary wire is broken. Repair the broken cable using the provided connectors.
General| Brand | Yard force |
|---|---|
| Model | MB 400 |
| Category | Lawn Mower |
| Language | English |
