Yard force NX 60i User Manual

12
GB
- After re- enter the new PIN, press button OK complete this setting.
Language
1. Press the button to enter the menu setting.
2. Select related number to set the language you require.
WiFi settings
Press the button to enter the menu setting.
There are 3 further options in “WiFi”.
Config
Select this option when you need to connect you mower to APP, see APP manual
Status
Show currently WiFi status
Mode
Client Mode-Default mode
Direct Mode-select this mode when you choose direct mode connection you on your phone.
Signal setting
- Set you require signal by pressing S1 or S2 button.
Sensor setting
1. Press the button to enter the menu setting.
2. Press the button to enter the sensor setting.
- UltraSonic sensor
This machine equipped 2 ultrasonic sensors which may detect the obstacle on the lawn. When the
sensor is actived, the robot will stop and then turn around when detect an obstacle.
Press to switch off the sensor.
Press to elect the detect distance you require.
- Rain sensor
NOTE: Mowing in the rain is not recommended.
This machine has a rain sensor which may stop the robot from mowing in the rain. When the
rain sensor is triggered, the robot will go back to the charging station first, where it will be fully
charged. Once charged the mower will remain in the charging station until the rain has stopped
before starting to mow again.
Note: Be careful not to short circuit the sensors on the machine with any metal objects. This will
cause the mower to work abnormally.
Press to switch off the sensor.
Press to set the extra time.
PIN code
1. Press the button to enter the menu setting.
2. Press the button to enter the PIN setting.
- This option sets the passcode of the mower to prevent theft or unauthorised change of the
menu settings. The existing (old) passcode is required to change to a new passcode. If you have
forgotten the passcode, contact your local dealer or after sales service.
The default passcode of the mower is “0000”.
Timer Sensor PIN English
1
2
3
4
Sensor Settings
1 2
UltraSonic
Rain
Raning Setting
ON
OFF
Settings
1
2 3
Delay Time In Charging
002 minute
UltraSonic Setting
30 cm (30-60)
UltraSonic Setting
ON
OFF
Settings
1
2 3
Timer Sensor PIN English
1
2
3
4
Enter Old PIN Code
* * * *
1
2
Re-Enter New PIN Code
* * * *
* * * *
Enter New PIN Code
Current Language Setting
English
Svenska
Deutsh
5
1 2
3
WiFi
Config
Status
Mode
1
2
3

Yard force NX 60i Specifications

General

Brand	Yard force
Model	NX 60i
Category	Lawn Mower
Language	English