Yard force YF12BLV - Turning the Blower Vac On; Plug Into Power Source; Select Lower Speed Level; Select Higher Speed Level

15
OPERATION
To Turn the Blower Vac On
1. Plug the power cord into an approved electrical extension cord, and connect to the power
source.
2. To turn the tool On and select lower speed level, push the switch button to position “1”, see
Fig. 13.
3. To turn the tool On and select higher speed level, push the switch button to position “2”, see
Fig. 14.
Fig. 13
TURN ON
lower speed
level
1
Fig. 14
TURN ON
higher speed
level
2
WARNING!
To Turn the Blower Vac Off
To turn tool Off, pull the switch button back to position “0” (Fig. 15).
Fig. 15
TURN OFF
IMPORTANT: After you have turned the blower vac off, do not leave tool plugged into the
power source.