Yard force YF12BLV - User Manual

Tyler DavisJul 28, 2025

What to do if my Yard force YF12BLV Lawn and Garden Equipment tool will not start?

D
David CrossJul 28, 2025
If your Yard force Lawn and Garden Equipment tool won't start, here's what you should check: 1. Ensure the On/Off switch is in the On position. 2. Verify the power cord is securely plugged in. 3. Confirm the outlet has power. If not, check the breaker. If the breaker tripped, ensure the circuit's capacity is adequate for the tool and that no other devices are overloading the circuit.

Summary

General Information

Intended Use

Defines the specific purpose for which the electric blower vac is designed and intended to be used.

Safety Instructions

Double-Insulated Blower Vac Specifics

Specific safety guidelines for the double-insulated blower vac model.

General Blower Vac Safety

General safety instructions applicable to the blower vac operation.

Further Safety Instructions

Avoid Wet Material Suction

Warning against using the tool for wet suction due to potential blockages and performance issues.

Intended Use: Dry Leaves

Defines the intended use for dry leaves and home gardening, warning against other uses.

Prohibited Areas of Use

Prohibition of using the tool in areas with hazardous debris or for wet suction.

Age and Supervision Requirements

Specifies age restrictions and supervision requirements for tool usage.

Assembly Instructions

Assembly for Blower Mode

Step-by-step instructions for assembling the tool for blower operation.

Assembly for Vacuum Mode

Step-by-step instructions for assembling the tool for vacuum operation.

Operation Guide

Flying Debris Safety Warning

Essential safety precautions regarding flying debris and protective gear.

Extension Cord Usage

Guidelines and warnings for using extension cords with the tool.

Extension Cord Damage Warning

Critical warning about inspecting extension cords for damage to prevent shock or fire.

Pre-Operation Checks

Pre-operation checks including safety gear, attachments, and environmental awareness.

Turning the Blower Vac On

Step-by-step instructions for starting the blower vac and selecting speed levels.

Plug Into Power Source

Initial step to connect the tool to a power source via an extension cord.

Select Lower Speed Level

Instruction to turn on the tool and set it to the lower speed setting.

Select Higher Speed Level

Instruction to turn on the tool and set it to the higher speed setting.

Firm Grip During Startup

Critical safety warning to firmly hold the tool during startup.

Turning the Blower Vac Off

Procedure for safely turning off the blower vac.

Switch Tool to Off Position

Instruction on how to switch the tool off using the control button.

Unplug After Use

Important reminder to always unplug the tool after use.

Motor Run-On Warning

Warning regarding the tool's motor continuing to run briefly after shutdown.

Disconnect for Configuration Changes

Crucial safety instruction to disconnect power before assembly or configuration changes.

Blower Mode Operation

Detailed instructions for operating the tool in blower mode.

Secure Vacuum Cover for Blowing

Step to ensure the vacuum cover is securely closed before blower operation.

Attach Blower Tube Assembly

Instruction to attach the blower tube to the main unit.

Connect Tool to Power

Connecting the tool to the power source via an extension cord.

Blower Operation Technique

Guidance on positioning, starting, and sweeping motion for effective blowing.

Vacuum Mode Operation

Detailed instructions for operating the tool in vacuum mode.

Remove Blower Tube for Vacuuming

Step to detach the blower tube before switching to vacuum mode.

Attach Vacuum Tube

Instruction to attach the vacuum tube assembly.

Attach Collection Bag

Procedure for attaching the debris collection bag.

Vacuum Operation Technique

Guidance on positioning, starting, and sweeping motion for effective vacuuming.

Handle Full Collection Bag

Instruction on what to do when the collection bag is full.

Collection Bag Attachment Warning

Critical warnings about correct bag attachment and suitable debris for the tool.

Emptying the Collection Bag

Instructions on how to properly empty the debris collection bag.

Collection Bag Emptying Procedure

Collection Bag Wear Warning

Warning about bag wear and tear, and the need for replacement if deteriorated.

Storage and Maintenance

Maintenance Safety Precautions

Crucial safety instruction to wear gloves and avoid maintenance on a running or hot tool.

Use Approved Replacement Parts

Warning to use only manufacturer-approved parts to ensure safety and performance.

Cleaning Plastic Parts Warning

Warning regarding cleaning agents and water contact with the tool's plastic parts.

Troubleshooting Guide

Tool Will Not Start

Diagnosing and correcting issues when the tool fails to start.

Tool Will Not Vacuum

Diagnosing and correcting issues when the tool fails to vacuum effectively.

Tool Will Not Blow

Diagnosing and correcting issues when the tool fails to blow air.

Vibration Warning

Instruction to stop use and seek inspection if the tool vibrates excessively.

Summary

General Information

Intended Use

Defines the specific purpose for which the electric blower vac is designed and intended to be used.

Safety Instructions

Double-Insulated Blower Vac Specifics

Specific safety guidelines for the double-insulated blower vac model.

General Blower Vac Safety

General safety instructions applicable to the blower vac operation.

Further Safety Instructions

Avoid Wet Material Suction

Warning against using the tool for wet suction due to potential blockages and performance issues.

Intended Use: Dry Leaves

Defines the intended use for dry leaves and home gardening, warning against other uses.

Prohibited Areas of Use

Prohibition of using the tool in areas with hazardous debris or for wet suction.

Age and Supervision Requirements

Specifies age restrictions and supervision requirements for tool usage.

Assembly Instructions

Assembly for Blower Mode

Step-by-step instructions for assembling the tool for blower operation.

Assembly for Vacuum Mode

Step-by-step instructions for assembling the tool for vacuum operation.

Operation Guide

Flying Debris Safety Warning

Essential safety precautions regarding flying debris and protective gear.

Extension Cord Usage

Guidelines and warnings for using extension cords with the tool.

Extension Cord Damage Warning

Critical warning about inspecting extension cords for damage to prevent shock or fire.

Pre-Operation Checks

Pre-operation checks including safety gear, attachments, and environmental awareness.

Turning the Blower Vac On

Step-by-step instructions for starting the blower vac and selecting speed levels.

Plug Into Power Source

Initial step to connect the tool to a power source via an extension cord.

Select Lower Speed Level

Instruction to turn on the tool and set it to the lower speed setting.

Select Higher Speed Level

Instruction to turn on the tool and set it to the higher speed setting.

Firm Grip During Startup

Critical safety warning to firmly hold the tool during startup.

Turning the Blower Vac Off

Procedure for safely turning off the blower vac.

Switch Tool to Off Position

Instruction on how to switch the tool off using the control button.

Unplug After Use

Important reminder to always unplug the tool after use.

Motor Run-On Warning

Warning regarding the tool's motor continuing to run briefly after shutdown.

Disconnect for Configuration Changes

Crucial safety instruction to disconnect power before assembly or configuration changes.

Blower Mode Operation

Detailed instructions for operating the tool in blower mode.

Secure Vacuum Cover for Blowing

Step to ensure the vacuum cover is securely closed before blower operation.

Attach Blower Tube Assembly

Instruction to attach the blower tube to the main unit.

Connect Tool to Power

Connecting the tool to the power source via an extension cord.

Blower Operation Technique

Guidance on positioning, starting, and sweeping motion for effective blowing.

Vacuum Mode Operation

Detailed instructions for operating the tool in vacuum mode.

Remove Blower Tube for Vacuuming

Step to detach the blower tube before switching to vacuum mode.

Attach Vacuum Tube

Instruction to attach the vacuum tube assembly.

Attach Collection Bag

Procedure for attaching the debris collection bag.

Vacuum Operation Technique

Guidance on positioning, starting, and sweeping motion for effective vacuuming.

Handle Full Collection Bag

Instruction on what to do when the collection bag is full.

Collection Bag Attachment Warning

Critical warnings about correct bag attachment and suitable debris for the tool.

Emptying the Collection Bag

Instructions on how to properly empty the debris collection bag.

Collection Bag Emptying Procedure

Collection Bag Wear Warning

Warning about bag wear and tear, and the need for replacement if deteriorated.

Storage and Maintenance

Maintenance Safety Precautions

Crucial safety instruction to wear gloves and avoid maintenance on a running or hot tool.

Use Approved Replacement Parts

Warning to use only manufacturer-approved parts to ensure safety and performance.

Cleaning Plastic Parts Warning

Warning regarding cleaning agents and water contact with the tool's plastic parts.

Troubleshooting Guide

Tool Will Not Start

Diagnosing and correcting issues when the tool fails to start.

Tool Will Not Vacuum

Diagnosing and correcting issues when the tool fails to vacuum effectively.

Tool Will Not Blow

Diagnosing and correcting issues when the tool fails to blow air.

Vibration Warning

Instruction to stop use and seek inspection if the tool vibrates excessively.

The Yard Force YF12BLV is a versatile 12 AMP electric blower, vacuum, and mulcher designed for outdoor power equipment use. It is intended for blowing, vacuuming, and mulching dry leaves, grass, and yard debris in private households and as a hobby tool in the garden. This device is not suitable for wet suction or for picking up health-endangering debris.

Function Description:

The YF12BLV operates in two primary modes: blower and vacuum/mulcher. In Blower Mode, the device uses a powerful airflow to clear leaves and debris from surfaces. Users can adjust the speed to either a lower (level 1) or higher (level 2) setting using the variable speed switch located on the motor housing. The blower tube is attached to the motor housing, and the vacuum cover must be firmly closed for this mode to operate. In Vacuum/Mulcher Mode, the device sucks up dry leaves and yard debris through a vacuum tube. The collected material is then mulched by an internal impeller before being deposited into a collection bag. This mode requires the vacuum tube assembly and collection bag to be attached, and the vacuum cover to be open. The mulching function helps to reduce the volume of debris, making it easier to dispose of.

Important Technical Specifications:

Model #: BV-14EG-12A
Input Voltage Rating: 120 V~60Hz
Amperage: 12 AMP
No Load Speed: 11000/15000 RPM (likely corresponding to the two speed levels)
Max Blower Air Speed: 155/245 MPH (likely corresponding to the two speed levels)
Max Vacuum Air Volume: 365 CFM
Collection Bag Capacity: 2 Bushels

Usage Features:

Dual Functionality: Easily switches between blower and vacuum/mulcher modes by changing attachments.
Variable Speed Switch: Allows for selection between two speed levels (1 and 2) for optimized performance based on the task.
Ergonomic Design: Features a handle on the motor housing for comfortable operation.
Extension Cord Compatibility: Requires a heavy-duty extension cord suitable for outdoor use (SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A type). A polarized plug and extension cord are required to reduce the risk of electric shock.
Cord Retention: Includes a method to secure the blower vac cord to the extension cord, preventing accidental disconnection during operation.
Safety Interlocks: The tool will not operate in blower mode without the vacuum cover in place, and the blower tube must be assembled to the motor housing before use.
Easy Assembly/Disassembly: Tubes and collection bag attach with "clicks" into position, indicating secure engagement. The vacuum tube can be removed by depressing a lock button and pivoting the tube.
Operating Tips:
- Always try to vacuum dry leaves, cuttings, or general garden debris. Wet materials are difficult to mulch and can clog the blower vac.
- Use blower mode to pile damp leaves, then vacuum them when dry.
- Avoid vacuuming stones or other hard objects, as these can damage the impeller.
- Do not pick up soil, as it can clog the blower vac when combined with other debris.
- Empty the collection bag when it is approximately half full to maintain optimal suction power and reduce weight.

Maintenance Features:

Cleaning:
- Keep the tool's air vents unclogged and clean at all times.
- Remove dust and dirt regularly with a rag or brush.
- Never use caustic agents to clean plastic parts; a mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.
- Clean the blower or vacuum tubes thoroughly before storing.
Collection Bag Care:
- Empty the collection bag after each use to prevent deterioration and obstruction of airflow.
- Wash the bag regularly (once a year is recommended) in soapy water and allow it to air dry completely before zipping it closed.
- Check the bag frequently for wear or deterioration, as a damaged bag can allow small objects to be thrown through, posing a risk of injury. Replace worn or deteriorated bags with new vacuum bags.
Storage:
- Store the tool, user manual, and accessories in a secure, dry, well-ventilated place, inaccessible to children.
- Store the tool locked up to prevent unauthorized use or damage.
Replacement Parts: Use only manufacturer-approved replacement parts, accessories, and attachments to ensure safety and optimal performance.
Pre-use Inspection: Before using the tool and after any impact, check for signs of wear or damage and repair as necessary.
Troubleshooting: The manual provides a troubleshooting guide for common issues such as the tool not starting, not vacuuming, or not blowing, with possible causes and fault corrections. For persistent issues or vibrations, it recommends having the tool inspected by an authorized service center.

Brand	Yard force
Model	YF12BLV
Category	Lawn and Garden Equipment
Language	English

Brand

Yard force

Model

YF12BLV

Yard force YF12BLV - User Manual

Table of Contents

Questions and Answers

Summary

12 AMP BLOWER;VACUUM;MULCHER OWNERS MANUAL

General Information

Intended Use

Safety Instructions

Double-Insulated Blower Vac Specifics

General Blower Vac Safety

Extension Cord Safety

Additional Safety Precautions

Continued Safety Instructions

Further Safety Instructions

Avoid Wet Material Suction

Intended Use: Dry Leaves

Prohibited Areas of Use

Age and Supervision Requirements

Assembly Instructions

Assembly for Blower Mode

Assembly for Vacuum Mode

Operation Guide

Flying Debris Safety Warning

Extension Cord Usage

Extension Cord Damage Warning

Pre-Operation Checks

Turning the Blower Vac On

Plug Into Power Source

Select Lower Speed Level

Select Higher Speed Level

Firm Grip During Startup

Turning the Blower Vac Off

Switch Tool to Off Position

Unplug After Use

Motor Run-On Warning

Disconnect for Configuration Changes

Blower Mode Operation

Secure Vacuum Cover for Blowing

Attach Blower Tube Assembly

Connect Tool to Power

Blower Operation Technique

Vacuum Mode Operation

Remove Blower Tube for Vacuuming

Attach Vacuum Tube

Attach Collection Bag

Vacuum Operation Technique

Handle Full Collection Bag

Collection Bag Attachment Warning

Emptying the Collection Bag

Collection Bag Emptying Procedure

Collection Bag Wear Warning

Vacuum Dry Debris

Avoid Vacuuming Hard Objects

Empty Bag at Half Full

Storage and Maintenance

Maintenance Safety Precautions

Use Approved Replacement Parts

Cleaning Plastic Parts Warning

Troubleshooting Guide

Tool Will Not Start

Tool Will Not Vacuum

Tool Will Not Blow

Vibration Warning

Product Warranty Information

Proof of Purchase Requirement

Warranty Coverage Limitations

Two-Year Limited Warranty

Ninety-Day Component Warranty

Warranty Claims Process

Contact Support for Service

Summary

12 AMP BLOWER;VACUUM;MULCHER OWNERS MANUAL

General Information

Intended Use

Safety Instructions

Double-Insulated Blower Vac Specifics

General Blower Vac Safety

Extension Cord Safety

Additional Safety Precautions

Continued Safety Instructions