21
APPLICATION
Engine R210-S
Working Pressure 2400 psi
Max Pressure 2800 psi
Working Flow 540 L/H
Max Flow
620 L/H
Displacement 209 cc
Max Power 7.0 hp
Pump Al
Detergent
1.6 L
Water Supply Not to Exceed 40°C Temperature
Thermal Protector act when water reaches 52°-68°C
Shipping Weight
29.5 kg
GENERAL MAINTENANCE RECOMMENDATIONS
The pressure washer warranty does not cover items that have been subjected to operator abuse or
negligence. To receive full value from the warranty, the operator must maintain the pressure washer as
instructed in this manual.
• Some adjustments will need to be made periodically to properly maintain your pressure washer.
• All maintenance in this manual and the engine owner’s manual should be made at least once each
season.
• Once a year you should clean or replace the spark plug, clean or replace the air lter and check the
spray gun and adjustable nozzle extension assembly for wear. A new spark plug and clean air lter
assure proper fuel-air mixture and help your engine run better and last longer. Please refer to your engine
owner’s manual for more details.
• If equipped with inatable tires, keep the air pressure at the value marked on the tire or within 1 and 2.8
bar
Before Each Use
1. Check engine oil level.
2. Check water inlet screen for damage.
3. Check in-line lter for damage.
4. Check high pressure hose for leaks.
5. Check chemical injection hose and lter for damage.
6. Check spray gun and adjustable nozzle extension assembly for leaks.
7. Rinse out garden hose to ush out debris.
PRESSURE WASHER MAINTENANCE
Check and Clean Inlet Screen. Examine the screen on the water inlet. Clean it if the screen is clogged or
replace it if screen is damaged.
Check High Pressure Hose. The high pressure hose can develop leaks from wear, kinking, or abuse.
Inspect the hose each time before using it. Check for cuts, leaks, abrasions or bulging of cover, damage or
movement of couplings. If any of these conditions exist, replace the hose immediately.
MAINTENANCE
To Next Page
Loading...
