39
1-866-902-9690
Blades continue to turn after
operator leaves seat without
parking pedal set.
1. Safety interlock system is not
functioning correctly.
1. Ensure safety interlock system
seat plug is fully connected.
If blades still won’t stop, take
mower to authorized service
center for repair.
Headlights not working.
1. Headlights are off.
2. Headlights are damaged.
1. Press headlight button to turn
headlights on.
2. Replace headlights.
Battery will not charge. 1. Poor cable connections.
1. Check/clean all battery
connections.
CHARGER ERROR CODES
CODE MEANING SOLUTION
Yellow LED ON Standby /
Red LED ashing (1HZ) Charging /
Green LED ON Fully charge /
Red and Green LED ashing
alternately (2HZ)
Abnormal temperature of the
battery
Allow the battery to cool and retry
Red and Green LED ashing
alternately (1HZ)
Battery protection Unplug charger from wall outlet and
mower. Wait for LEDs to turn off,
then reconnect. If issue continues,
contact customer service
Yellow LED ashing Charge failure Unplug charger from wall outlet and
mower. Wait for LEDs to turn off,
then reconnect.
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
