To Next PageTo Next PageWhat to do if my Yard Force Lawn Mower engine does not start?
If the Yard Force Lawn Mower engine doesn't start, it could be due to several reasons. First, ensure that you press the engine on/off control bar. Other potential causes include a defective spark plug (replace it), a worn or damaged cutting blade (replace it through the customer service centre), an empty fuel tank (refill with fuel), or a flooded engine (remove plug and dry).
How to fix an unsteady running engine on a Yard Force Lawn Mower?
If the engine of your Yard Force Lawn Mower runs unsteadily, the air filter or spark plug may be soiled. You should clean the air filter and clean the spark plug.
What to do if Yard force YF22-2N1 Lawn Mower gives uneven mowing results?
If your Yard Force Lawn Mower is producing uneven mowing results, it could be because the blade is blunt or the cutting height is too low. To fix this, sharpen the blade and set the correct height.
Why is my Yard force YF22-2N1 so loud and vibrating?
If your Yard Force Lawn Mower is running loudly and vibrating heavily, it's likely due to loose screws, loose blade fasteners, or an unbalanced blade. To resolve this, tighten the screws, tighten the blade fasteners, or replace the blade.
General| Power Source | Battery |
|---|---|
| Cutting Width | 22 inches |
| Cutting Height Adjustment | Single lever |
| Deck Material | Steel |
| Number of Cutting Height Positions | 7 |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge | Yes |
| Battery Voltage | 40 V |
| Voltage | 40 V |
| Cutting Height | 1.5-4 inches |
| Wheel Size | Front: 8 inches, Rear: 11 inches |
Explains the meaning of safety symbols used in the manual.
Lists and explains warning symbols displayed on the lawn mower itself.
Provides essential training guidelines for operating the lawn mower safely.
Details necessary preparation steps before using the lawn mower.
Covers critical safety aspects during the operation of the lawn mower.
Outlines safety precautions related to maintaining and storing the lawn mower.
Introduces the parts list and visual identification of lawn mower components.
Specifies the designed purpose and limitations for using the lawn mower.
Instructions for safely removing the lawn mower from its packaging.
Step-by-step guide to assemble the handle of the lawn mower.
Details how to secure the bowden cable to the lawn mower handle.
Instructions for attaching the side discharge chute to the mower.
Procedures for checking and filling the engine oil level before operation.
Instructions on how to safely fill the lawn mower's fuel tank.
Guide on adjusting the lawn mower's cutting height for different lawn conditions.
Explains how to switch between mulching and side discharge functions.
Step-by-step guide on how to start and stop the lawn mower engine.
Detailed instructions for safely stopping the lawn mower engine.
Procedure to follow if the engine becomes flooded with fuel.
General advice and safety warnings for the mowing process.
Practical tips for efficient and effective lawn mowing.
Instructions for cleaning the lawn mower after use.
Guide on how to maintain and clean the spark plug.
Steps for inspecting and cleaning the air filter element.
Guidance on checking and topping up the engine oil level.
Safety warnings and general advice regarding blade replacement.
Steps for storing the mower for less than 15 days.
Procedures for storing the mower for more than 15 days.
Recommended schedule for routine maintenance tasks.
Instructions for safely transporting the lawn mower.
Lists common faults, their causes, and recommended remedies for the lawn mower.
Details the terms and conditions of the Yard Force two-year limited product warranty.
Outlines the specific two-year warranty coverage for the engine.
Specifies the 90-day warranty coverage for mower accessories.
Step-by-step guide on how to initiate a service or warranty claim.
