ALL MODELS
Step 22. To attach the bag, place the opening of
the bag over the chute deflector so it
completely covers the chute deflector.
23. Depress the plunger on the drawstring,
and pull on the drawstring until the bag is
tight around the chute opening. Release
plunger to lock it into position.
K
Step 24. Remove oil fill dipstick.
Step 25. With chipper shredder on level ground,
use a funnel to fill engine with oil to
FULL mark on dipstick.
Step 26. Check oil level.
Step 27. Add oil if necessary.
Step 28. Replace dipstick and tighten.
Remove dipstick
and fill oil
7
To Next Page
Loading...
Need help?
General
