model no. 054-5752-2 | contact us: 1.866.523.5218
4
Symbols
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
more safely.
Symbol Name Designation/Explanation
V
Volts Voltage.
A
Amperes Current.
Hz
Hertz Frequency (cycles per second).
W
Watts Power.
min
Minutes
Time.
Alternating Current
Type of current.
Direct Current
Type or a characteristic of current.
No Load Speed
Rotational speed, at no load.
Class II Construction
Double-insulated construction.
/min Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute.
Wet Conditions Alert
Do not expose to rain or use in damp locations.
Read The Instruction
Manual
To reduce the risk of injury user must read and understand
instruction manual before using this product.
Eye Protection
Wear eye protection when operating this equipment.
Wear Ear Protection Wear ear protection when operating this equipment.
Safety Alert
Precautions that involve your safety.
Operate With Two Hands
Hold and operate the saw properly with both hands.
Electric Shock Precaution
Remove plug from the mains immediately if cable is
damaged or cut.
Kickback
DANGER! Beware of kickback.
Bar Nose Contact
Avoid bar nose contact.
Wear Gloves
Wear non-slip, heavy-duty protective gloves when handling
the chainsaw.
Wear Safety Footwear
Wear non-slip safety footwear when using this equipment.
Keep Bystanders Away
Keep all bystanders at least 50’ (15 m) away.
One Handed
Do not operate the saw using only one hand.
To Next Page
Loading...
Need help?
General
