11
model no. 060-1703-8 | contact us: 1.866.523.5218 model no. 060-1703-8 | contact us: 1.866.523.5218
Operation
EMPTYING
• Empty the grass catcher (13) frequently during use. Do not wait until it is completely
full. We recommend emptying it when it is half full.
• Put the upper handle bar (4) into the parking position.
• Lift the deflector guard (8) up and hold it in place.
• Lift the grass catcher (13) off the supports (13e).
• Remove the grass clippings from the discharge chute (22) into the grass catcher (13).
Use a proper tool such as a brush.
• Empty the grass clippings onto a compost heap.
• Re-fit the grass catcher (13) to the supports (13e).
When using the product without the grass catcher, insert the mulching insert (21).
Switch the motor off and wait until the blade has come to a complete stop before
removing the grass catcher!
MULCHING INSERT
For mulching work use the mulching insert (21).
• Put the upper handle bar into the parking position.
• Open the deflector guard (8) and hold it in position.
• Remove the grass catcher (13) if necessary.
• Insert the mulching insert (21) into the rear discharge chute (22) (Fig. 12).
Ensure the unlock button (21a) snaps into place.
• Press the unlock button (21a) to release and remove the mulching insert (21) (Fig.
13).
!
WARNING! Do not attempt to use the product without
the grass catcher attached when collecting grass–
danger of flying objects! When using the product
without the grass catcher, insert the mulching insert
(21). Switch the motor off and wait until the blade has
come to a complete stop before removing the grass
catcher!
Fig. 13Fig. 12
21
8
21a
To Next Page
Loading...
Need help?
General
