To Next Page

To Previous Page

model no. 060-1703-8 | contact us: 1.866.523.5218

Operation

AFTER USE

• Switch the product off and let it cool down.

• Check, clean and store the product as described below.

WARNING: If the product strikes a foreign object, stop

the engine. Switch the product off, disconnect it from

the power supply and let it cool down. Inspect the

product thoroughly for damage. Have any damage

repaired before restarting. Extensive vibration of the

product during operation is an indication of damage.

WARNING: For your safety, it is required that the plug

attached to the lawn mower is always connected to an

extension cord. The extension cord must be suitable

for outdoor use with sockets protected against water

splashing. The extension cord must always be used

with the cord restraint system (16).

MOWING

• Make sure the lawn is clear of stones, sticks, wires, and other objects that could

damage the lawn mower blades or motor. Such objects could be accidentally thrown

by the mower in any direction and cause serious personal injury to the operator and

others.

• To reduce the possibility of disconnecting the lawn mower from the extension cord,

ensure that the cord restraint system is used.

• For a healthy plot of grass, only cut off one-third or less of the total length of the

grass.

• When cutting heavy grass, reduce walking speed to allow for more effective cutting

and a proper discharge of the clippings.

• Do not cut wet grass. It will stick to the underside of the deck and prevent proper

mulching of grass clippings.

• New or thick grass may require a narrower cut.

• Clean the underside of the mower deck after each use to remove grass clippings,

leaves, dirt, and any other accumulated debris.

Yardworks 060-1703-8 User Manual

Questions and Answers: