9
model no. 060-1703-8 | contact us: 1.866.523.5218 model no. 060-1703-8 | contact us: 1.866.523.5218model no. 060-1703-8 | contact us: 1.866.523.5218
Operation
GENERAL OPERATION
Check the product, its power cord and plug as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear.
• Double check that the blade is properly fixed.
• Always hold the product by its handles. Keep the handles dry to ensure safe support.
• Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the
product.
• Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to a complete stop before
removing the grass collection box.
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the product.
CUTTING HEIGHT ADJUSTMENT
Adjust the cutting height according to the needs of your lawn. The cutting height
depends on the kind of lawn and its actual height. When mowing high grass, start with
the maximum cutting height and make a second cut with lower cutting height.
• Push the lever for height adjustment (10) towards the product (step 1) and move it to
the desired cutting height (Fig. 9, step 2).
• Release the lever (10) (Fig. 9, step 3) and ensure it locks into place properly.
ON/OFF SWITCH
• Press on the lock-off button (2) to unlock the start lever (3).
• Then operate the start lever (3) to switch the mower on (Fig. 8).
Fig. 8
2
3
To Next Page
Loading...
Need help?
General
