Yardworks 060-1703-8 User Manual

model no. 060-1703-8 | contact us: 1.866.523.5218
8
model no. 060-1703-8 | contact us: 1.866.523.5218
Ensure that the power cord (16) is properly fixed with the cord clips (14) to the handle.
Connect to the power supply.
!
WARNING: For your safety, the handle must be in
cutting position before connecting the plug to socket!
!
WARNING: Do not connect to power supply until the
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
• Double the extension cord back, about 16” (40 cm) from the end. Lead the loop
through the cord strain relief (6) and hang the loop over the hook. Gently pull on the
cord to ensure that it is fastened (Fig. 7).
Assembly
Fig. 7
6
4
Fig. 5 Fig. 6
7
12b
15
12c
• Fix the upper handle (4) using the enclosed screws (15) and the wing nuts (12b) on the
lower handle (7) (Fig. 5). There are two possible positions.
• Secure the cord (16) with the cord clips (14) (Fig. 6).
6
14

Yardworks 060-1703-8 Specifications

General

Brand	Yardworks
Model	060-1703-8
Category	Lawn Mower
Language	English