15
CUTTING TIPS (See Fig. 7)
Keep the trimmer tilted toward the area being cut; this is the best cutting area.
The string trimmer cuts when passing the unit from left to right. This will avoid throwing debris
at the operator.
Use the tip of the string to do the cutting; do not force string head into uncut grass.
Wire and picket fences cause extra string wear, even breakage. Stone and brick walls, curbs,
and wood may wear strings rapidly.
Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can easily be
damaged by the strings.
Fig. 7
DIRECTION
OF
ROTATION
BEST CUTTING
AREA
DANGEROUS
CUTTING AREA
OPERATION
TELESCOPING BOOM (See Fig. 8)
The boom can be extended or shortened for ease of use.
Unplug the string trimmer.
Unscrew telescoping boom coupler and slide to desired position.
Tighten telescoping boom coupler.
ROTATING REAR HANDLE (See Fig. 9)
Unplug the string trimmer.
Pull up edging coupler and turn handle end counterclockwise.
Release edging boom coupler when handle has been rotated 180°.
To Next Page
Loading...
Need help?
General