Item # 060-1983-0 | contact us: 1.866.523.5218 Item # 060-1983-0 | contact us: 1.866.523.5218
13” (33 CM) CORDLESS GRASS TRIMMER
2
Quick Start Guide
BEFORE OPERATION
1. CHARGING PROCEDURE (SEE FIG. D.)
a) Plug the charger into an appropriate outlet.
b) Slide the battery pack into the charger; the light will begin ashing green to indicate the
charging process has started.
c) When charging is completed, the light will turn solid green. The pack is now fully charged;
unplug the charger and remove the battery pack.
1
2
E
2. INSTALLING AND REMOVING THE BATTERY PACK
Slide the battery pack into tool’s battery port. A simple push and slight pressure will be sufcient.
Press the battery pack latch and remove the battery pack from the tool. (See Fig. E.)
* This information is provided for your convenience. It does not replace the instruction manual
and safety instructions. The manual and safety instructions need to be read and understood in
their entirety.
D
C3
To Previous Page
Loading...
Need help?
General