Need help?Do you have a question about the Yardworks RS25CCPR and is the answer not in the manual?
General| Engine Displacement | 25cc |
|---|---|
| Engine Type | 2-Cycle |
| Shaft Type | Straight |
| Type | Gas-powered trimmer |
| Cutting Swath | 17 inches |
| Handle Type | Loop handle |
Identifies the danger area created by thrown objects from the trimmer line and advises keeping people away.
Mandatory safety gear to protect the operator from injury, including eye and hearing protection.
Rules for using specified trimmer parts and avoiding unauthorized attachments like blades.
Essential precautions for the user during operation, covering attire, alertness, and body positioning.
Safety measures for unit maintenance, repairs, and general condition checks.
Guidelines for safely mixing, handling, and storing gasoline and oil mixtures.
Procedures for safely transporting and storing the grass trimmer unit.
Safety checks for the work area and limitations on trimmer usage.
Specific safety instructions for using various optional attachments with the trimmer.
Critical warnings regarding blade thrust, installation, and proper usage to prevent severe injury.
Step-by-step guide for attaching the trimmer head assembly to the unit's shaft.
Instructions for correctly mounting the debris shield for operator protection.
Steps to properly adjust the position of the assist handle for comfortable and safe operation.
Familiarization with the location of various controls and adjustments on the trimmer unit.
Important safety and information checks required before attempting to start the engine.
Safe steps for refueling the unit, including handling the fuel cap and mixture.
Instructions for safely stopping the engine by releasing the throttle and using the ON/STOP switch.
Step-by-step guide for starting the engine when it is cold, including primer bulb usage.
Procedure for starting the engine if it has become flooded with too much fuel.
Information on how the coupler allows for the installation of optional attachments.
Steps for safely detaching the trimmer head or other optional attachments from the unit.
Steps for correctly attaching optional accessories to the trimmer unit's coupler.
Illustrates the correct stance and PPE required for safe and effective operation of the trimmer.
How to advance the trimmer line by tapping the trimmer head on the ground.
Guidance on using the tip of the line and proper cutting methods for efficiency and reduced wear.
How to use the trimmer for mowing in areas inaccessible to conventional lawnmowers.
Method for removing unwanted vegetation down to the ground, noting increased line wear.
Using the trimmer line's fanning action to blow away light debris from an area.
Steps to clean the air filter to maintain engine performance and reduce emissions.
Routine checks for loose screws, nuts, bolts, and worn parts on the unit.
Identifying and addressing damaged or worn components, including the ON/STOP switch and fuel tank.
Importance of maintaining the muffler and spark arresting screen for performance and safety.
Guidance on replacing the spark plug annually for easier starting and better engine running.
Detailed instructions on how to remove old line and install new trimmer line on the spool.
Steps for removing and installing the trimmer head assembly, including securing it properly.
How to adjust the engine's idle speed to prevent stalling or unwanted spinning of the cutting head.
Instructions for cleaning and storing the unit properly at the end of the season or for extended periods.
Advice on fuel stabilizer and proper fuel storage to prevent gum deposits.
Steps to prepare the engine for long-term storage, including oiling and spark plug maintenance.
Additional recommendations for storing fuel and gasoline cans.
A guide to diagnosing and resolving common engine problems like not starting or idling improperly.
To Next Page