SETTING METER PARAMETERS
Setting Date, Time
When the battery is installed the first time or
every time it’s replaced, the meter will
automatically enter the setting mode. Please
set the current time and date before you begin
testing.
To set the time and date
1. Press“S”button for 2 seconds to turn on
the meter. The meter will enter the setting
mode automatically.
2. The year flashes at the sound of beep, for
example for the year of 2017, number
“17 “will flash.
3. Press“S”button to obtain the desired year.
4. Press“M”button to confirm and shifts to
the next setting.
5. Repeat to set the month, data, hour and
minute.
6. After minute is set, the meter will display
“OK” before turning off.
Prepare for Blood Sampling Adjustable
Lancing Device
Used with lancet to obtain a blood sample.
1. Depth adjustment Cap
2. Depth Selector
3. Lancet Holder
4. Cocking Control
5. Release Button
6. Exit Button
Lancet
Used with lancing device to obtain a blood
sample.
1. Protective cap
Important Information
• Lancet is for single use only.
• Keep lancing device and lancets clean.
• Use caution when removing the used lancet
from the device and disposing.
• The lancing device and lancets are in
conformity with MDD 93/42/EEC. Refer to
product labels for contact information of
manufacturer and CE marking.
Used with lancet to obtain a blood sample.
7
To Next Page
Loading...