Eye-piece frame
Body
Shutter
ass'y
Amplifier
ass'y
Mirror
box ass'y
Fig. 3
3. ASA base plate ass'y removal:
(
1)
Remove the rewind shaft holder
nut
which holds the
ASA
dial shaft
with
ASA click plate ass'y
and
ASA
contact holder
ass'y.
(2) Remove the
ASA
lock spring shaft,
ASA
lock spring
and
E-ring.
(3)
Remove one GS-ring, ASA lock lever ass'y,
and
ASA
lock lever shaft.
Note: Do
not
reuse
the removed GS-ring. (Reusing
will
cause
malfunction)
(4)
Remove
two
E-rings (E-15) and
ASA
reverse
lever.
(5) Remove one
ASA
base
setscrew (61912522) which holds ASA
base
ass'y.
4.
(1) Remove
two
setscrews at
bottom
of
body which hold the
Amplifier
ass'y
to
the body.
(2) Remove the eyepiece frame.
5.
Mirror
box
ass'y removal:
(1) Remove the
two
mirror
box setscrews (61927024x2) at the back
and
two
mirror
box setscrews
(132143x2) at the
front.
Carefully pull
out
the
mirror
box ass'y
with
Amplifier
from the body.
* When
mirror
box
is
put
aside,
make sure that the mount surface
is
placed downward.
* The
mirror
box consists
of
six basic components: a pentagonal framework,
ML
base
plate (right),
MC
base
plate (left).
AVR
base
plate (right).
QR
base
plate (lower surface),
and
the
mirror
box
main body.
*
Be
careful to
keep
clean the
release
magnet
of
QR
base
plate.
3
To Next Page
Loading...
