Need help?Do you have a question about the YASKAWA CIMR-G5A 4045 and is the answer not in the manual?
General| Model | CIMR-G5A 4045 |
|---|---|
| Category | Inverter |
| Rated Current | 45A |
| Output Current | 45A |
| Applicable Motor Capacity | 22kW |
| Power Rating | 22kW |
| Cooling Method | Forced Air Cooling |
| Operating Temperature | -10 to +50°C |
| Storage Temperature | -20 to +60°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | Up to 1000m |
| Protection Level | IP20 |
| Input Voltage | 380-480V |
| Output Voltage | 380-480V |
| Frequency Range | 0.1 to 400Hz |
| Control Method | V/f control |
| Protection Features | Overvoltage, Undervoltage, Overheating, Short Circuit |
| Communication Interface | RS-485 |
Provides guidelines for installing the VS-616G5 Inverter in an appropriate site to maintain optimal operating conditions.
Details wiring terminals, main circuit connections, control circuit connections, and related specifications.
Details the maintenance period and procedures for daily and periodic inspections, including part replacement.
Provides guidelines for checking and controlling the installation site, including ambient temperature and protection from foreign matter.
Details applicable wire sizes, closed-loop connectors, and terminal functions for main circuits.
Specifies wire sizes, closed-loop connectors, and terminal functions for control circuits.
Outlines the step-by-step procedure for performing trial operation of the VS-616G5 Inverter.
Details the procedures for power-on, display status check, constant initialization, input voltage setting, autotuning, and operation.
Describes common settings applicable to all control methods, including access level and control method selection.
Lists constants related to Initialize mode, such as language selection, access level, and passwords.
Details constants used in programming mode, categorized by function group (Application, Tuning, Reference, etc.).
Describes fault displays, probable causes, and corrective actions for Inverter faults.
Provides solutions for common motor and Inverter problems, including non-operation, reversed rotation, and overheating.
Details the maintenance period and procedures for daily and periodic inspections, including part replacement.
To Next Page