Need help?Do you have a question about the YASKAWA CIMR-G5A 23P7 and is the answer not in the manual?
Instructions and precautions for connecting main and control circuit terminals.
Details the preparations and digital operator procedures for trial operation, including autotuning.
Explains basic settings for open-loop vector control, including autotuning.
Details basic settings for V/f control, including motor constants and V/f patterns.
Covers settings for flux vector control, including PG card settings and zero-speed operation.
Explains settings for V/f control with PG feedback, including motor constants and gain adjustments.
Covers functions and constants for open-loop vector control, including torque limits and motor constants.
Details functions for V/f control without PG, including energy-saving and hunting-prevention.
Explains functions for flux vector control, including droop control, zero-servo, and torque control.
Covers functions for V/f control with PG, including energy-saving and hunting-prevention.
Lists all user constants for programming mode, categorized by function group.
Details fault displays, meanings, probable causes, and corrective actions for inverter faults.
Provides guidance on diagnosing and resolving potential motor and inverter operational issues.
To Next Page
General