YASKAWA GPD 315/V7 - Page 3

Serial Communication Option Ki
t
for GPD 315/V7
Yaskawa Electric America Inc-www.drives.com
02Y00025-0514 Page 3 of 8
Date: 08/23/01
4) Remove the digital operator from the
top portion of the drive assembly. Drive
should now appear as shown in Figure 4.
Figure 4
5) Use a diagonal side cutters
to cut the three plastic tabs
(Figure 5 w/ black lines
pointing to them) that secure
the protective cover over the
GPD315/V7's CN2 port.
Remove this protective cover.
Figure 5