YASKAWA GPD 315/V7 - Page 4

Serial Communication Option Ki
t
for GPD 315/V7
Yaskawa Electric America Inc-www.drives.com
02Y00025-0514 Page 4 of 8
Date: 08/23/01
6) The CN2 port should be exposed
(highlighted by black arrow: Figure 6) after
performing this operation.
Figure 6
7) The backside of the Serial
Communication Option Kit is shown in
Figure 7. Make sure that the blue ground
wire on the back side of unit is looped
through the case cut-out (highlighted by
grey circle).
Figure 7