What to do if YASKAWA DC Drives shows Modbus Error Code 03h?
If your YASKAWA DC Drive displays Modbus Error Code 03h, it indicates that the number of data items exceeds the limit. Ensure that the number of data items sent does not exceed 16.
What to do if YASKAWA DC Drives shows Modbus Error Code 21h?
If you're seeing Modbus Error Code 21h on your YASKAWA DC Drives, it means the upper or lower limit has been exceeded in the write-in data. Check and adjust the limits of the data being written to resolve this issue.
What to do if YASKAWA DC Drives shows Modbus Error Code 01h?
If your YASKAWA DC Drives is showing Modbus Error Code 01h, this indicates an unregistered function code. To fix this, check the function code being sent in the command message.
What to do if YASKAWA DC Drives shows Modbus Error Code 02h?
If your YASKAWA DC Drives displays Modbus Error Code 02h, it signifies an unregistered register number. Verify the register number included in the command message to correct this.
What to do if YASKAWA DC Drives shows Modbus Error Code 22h?
If you encounter Modbus Error Code 22h on your YASKAWA DC Drives, it means write-in is disabled for the specified register. Ensure write-in commands are not attempted under conditions that disable write-in.
General| Brand | YASKAWA |
|---|---|
| Model | GPD 315/V7 |
| Category | Conference System |
| Language | English |
Describes setup and protocol for Modbus Communication using RS-485 and RS-422.
Details data exchangeable with the drive via Modbus RTU.
Locates and describes terminals for RS-485 and RS-422 communication.
Explains how to set origins for run/stop and frequency commands.
Details parameters for configuring serial communication.
Lists all configurable drive parameters with their addresses and settings.
To Next Page
