Serial Communication Option Ki
for GPD 315/V7
Yaskawa Electric America Inc-www.drives.com
02Y00025-0514 Page 7 of 8
Date: 08/23/01
12) Snap Serial Communication Kit
securely in place as shown in Figure 12.
Figure 12
13) Remove Decorative M3X8.5 Screw
from plastic bag (silver colored) and place
in recessed circular hole at top of Serial
Communication Kit (where screwdriver is
presently located in Figure 13).
Tighten this screw with Philips screwdriver.
Figure 13
To Next Page
Loading...