11
2 Transporting
CAUTION
• Sling applications and crane or forklift operations must be performed by authorized personnel
only.
Failure to observe this caution may result in injury or damage.
• Avoid excessive vibration or shock while transporting.
The system consists of precision components, so failure to observe this caution may adversely affect
performance.
2.1 Using the Casters
CAUTION
• When using the casters, move the welder slowly so that it can be stopped quickly at any time.
Moving the welder with casters quickly may result in an accident due to inertia and you cannot control the
direction of movement.
• Be sure to stop the welder with casters at a step and move it slowly to prevent any shock
sudden.
• Do not move the welder with casters up a slope, stairs, etc.
2.2 Using the Crane
When using the crane, be sure to confirm the following points before transporting.
• The welder mass is approx. 60kg. Select the wire suitable for the mass and angle.
• Use the eyebolts for transporting and confirm that the eyebolts are tightened firmly
before transporting.
Lift the welder using crane after completion of the above confirmation.
Wire
60° or more
Eyebolt M8
To Next Page
Loading...