E-6
• Do not install or store the product in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed prod-
uct specifications
• Locations that are subject to relative humidities that exceed product
specifications
• Locations that are subject to condensation as the result of extreme
changes in temperature
• Locations that are subject to corrosive or flammable gases
• Locations that are near flammable materials
• Locations that are subject to dust, salts, or iron powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock that exceeds product
specifications
• Locations near devices that generate strong magnetic fields
• Locations that are subject to radiation
If you store or install the product in any of the above locations, the prod-
uct may fail or be damaged.
• Do not drop the product or subject it to strong shock.
There is a risk of failure or damage.
• Never install the product in an atmosphere containing halogen (fluo-
rine, chlorine, bromine, or iodine).
There is a risk of failure or damage.
• Remove all static electricity from your body before you touch the prod-
uct.
There is a risk of equipment damage due to static electricity.
• When you install the product, press it firmly all the way to the back of
the slot. If the product cannot be pressed to the back of the slot, do
not force it. Remove it from the slot and try again.
There is a risk of malfunction or failure in the product or computer.
• Depending on the computer in which you install the product, the prod-
uct may need to be secured with screws or other means after installa-
tion. If doing so is necessary, secure the product reliably. Refer to the
documentation for the computer you are using for the method to
secure the product.
If the product is not secured properly, there is a risk of malfunction or fail-
ure in the product or computer.
To Next Page
Loading...
