Inverter SIO Driver
GP-Pro EX Device/PLC Connection Manual
46
î Device Setting
To display the [Individual Device Settings] dialog box, select the external device and click [Setting] from
[Device-Specific Settings] in the [Device/PLC] window. To connect multiple External Devices, click from
[Device-Specific Settings] in the [Device/PLC] window to add another External Device.
Parity Select how to check parity.
Stop Bit Select stop bit length.
Flow Control
Select the communication control method to prevent overflow of transmission and reception
data.
Timeout
Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the response
from the External Device.
Retry
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Wait To Send
Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving packets
to transmitting next commands.
Setup Items Setup Description
Series Select the series of the External Device.
Slave Address Enter the slave address of the External Device, from 1 to 255 (DEC).
Setup Items Setup Description
To Next Page
Loading...
Need help?
General